REED R5040 1000A AC/DC Clamp Meter with Temperature and Non-Contact Voltage Detector, True RMS
REED R5040 Offers
This autoranging True RMS clamp meter is capable of measuring AC/DC current and voltage, resistance, frequency, capacitance, duty cycle and temperature. Featuring a 50,000 count backlit LCD display with a 61-segment analog bargraph and double molded plastic housing, the R5040 keeps track of min/max readings and includes a non-contact voltage detector built into the clamp tip.
- Measures AC/DC current/voltage, resistance, capacitance, frequency, duty cycle and temperature
- 50000-count backlit LCD display and analog bargraph
- Low battery and overrange indicators
- Built-in non-contact voltage detector with LED indicator
- True RMS AC measurements
- Min/Max, display hold and relative mode
- Diode test and continuity check functions
- Durable double molded plastic housing
- Cat. III 600V safety rating
REED R5040 Specifications
|Accuracy||AC: ±(2.8% rdg. +30 dgt.)
DC: ±(2.5% rdg. +30 dgt.)
|Resolution||0.01, 0.1, 1A|
|Range||AC: 500mV, 5, 50, 500, 750V
DC: 500mV, 5, 50, 500, 1000V
|Accuracy||AC: ±(1.0% rdg. +30 dgt.)
DC: ±(0.1% rdg. +4 dgt.)
|Resolution||AC/DC: 0.1mV, 0.001, 0.01, 0.1, 1V|
|Range||500Ω, 5, 50, 500kΩ, 5, 50MΩ|
|Accuracy||±(1.0% rdg. +4 dgt.)
0.1Ω, 0.001, 0.01, 0.1kΩ, 0.001, 0.01MΩ
|Range||500, 5000nF, 50, 500µF, 5mF|
|Accuracy||±(3.5% rdg. +10 dgt.)|
|Resolution||0.01, 0.1nF, 0.01, 0.1μF, 0.1mF|
|Accuracy||±(0.3% rdg. +2 dgt.)|
|Range||-148 to 1832°F (-100 to 1000°C)|
|Accuracy||±(1.0% rdg. + 4.5°F)
±(1.0% rdg. + 2.5°C)
|Range Selection||Autoranging / Manual|
|Display||50,000 count LCD display|
|Analog Bargraph||Yes (61-segment)|
|Continuity Check||Audible signal if resistance <35Ω|
|Non-Contact Voltage Detector||Yes|
|Autoshut off||Yes (after 15 mins)|
|Power Supply||9V Battery|
|Low Battery Indicator||Yes|
|Jaw Opening||1.5" (40mm), up to 500 MCM|
|Overvoltage Category||CAT. III 600V|
|Operating Temperature||32 to 122°F (0 to 50°C)|
|Storage Temperature||-4 to 140°F (-20 to 60°C)|
|Dimensions||9.1 x 3.0 x 1.5" (232 x 77 x 39 mm)|
What's included with the REED R5040
- AC/DC True RMS Clamp Meter
- Test Leads
- Thermocouple Wire Probe
- Thermocouple Adapter
- Soft Carrying Case
Ideal Applications for the REED R5040
Industrial maintenance teams performing scheduled and preventative maintenance on electro-mechanical equipment and systems.
Facilities, building maintenance and electricians looking to troubleshoot electrical equipment installation problems.
Click on a category to view a selection of compatible accessories with the REED R5040 1000A AC/DC Clamp Meter with Temperature and Non-Contact Voltage Detector, True RMS.
Model: LS-181This type-k male thermocouple connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-181 is rated up 425°F (250°C) and is color coded according to ANSI thermocouple identification standards.
Model: LS-109This surface thermocouple probe is designed for flat or convex surface temperature measurements. Exposed ribbon allows for direct contact with surface. The LS-109 is color coded according to ANSI thermocouple identification standards.
Model: LS-103Specially designed to measure air or gases in heating and cooling units, ovens and engine exhausts. The is color coded according to ANSI thermocouple identification standards.
Model: TP-01This Type-K beaded thermocouple wire probe is recommended for basic general purpose temperature applications. The TP-01 is color coded according to ANSI thermocouple identification standards.
Model: LS-182This type-k female thermocouple connector is constructed of glass-filled nylon for increased strength and wear resistance. The LS-182 is rated up 425°F (250°C) and is color coded according to ANSI thermocouple identification standards.
Model: FC-300Set of two test leads with built-in fuses for added protection.
Model: TL-88-1Right angle and straight end flexible leads with shrouded banana plugs.